Showing posts with label exhaust. Show all posts
Showing posts with label exhaust. Show all posts

Tuesday, August 16, 2011

RC BO 105 - The maiden flight

RC BO 105 - The maiden flight On YouTube.





Despite the wind and wet meadow was the first flight yesterday I finally finished Bo 105 (500 size). Because it's my first semi-scale project, the construction lasted a long time and am very pleased THEREFORE war, when he finally hung the first time in the sky. Showed that the control is still getting used to and I had a sudden severe interference in the end, dying alone in a contraction of the servant and the slow reaction of 1-2 seconds. There was a landing speed. But they still areI am satisfied with the result that I had expected much worse. Specifications continued: - Fuselage Gensmantel - Alba Inverted Frame - Tail Boom Micro Heli - Tail Rotor Acrobat SE - rear blades T-Rex 500 - Main Rotor KDS-500 - Main Gear Eco 8 - M-bladed rotor blades 430 mm aluminum - Optotronix lighting with Luxeon Emitter - SLS 4S Lipo 5000 mAh - Kora 15-10 motor - 06.18.55 Jazz speed controller - Gy-401 gyro system - Futuba S9257 tail servo - HitecServe HS85MG TS - Super Double Futuba R149 receiver

Tags: Bo, 105, Eurocopter, Bolkow, Bölkow, RC, Helicopter, Heli, Ferngesteuert, Hubschrauber, 500, T-Rex, Scale, Semi-Scale, Red, Bull, Ludwigsburg, Blade, Eco, Acrobat, SE, KDS, Gensmantel, SLS, Kontronik, Kora, Jazz

tailgating tent richmond cedar works ice cream maker Binocular Tripod Adapters

Tuesday, June 14, 2011

Hacker A50-16S Brushless Outrunner RC Motor, 395g, 1250W, 378 RPM/Volt

Hacker A50-16S Brushless Outrunner RC Motor, 395g, 1250W, 378 RPM/Volt Review




Availibility : Usually ships in 24 hours



Hacker A50-16S Brushless Outrunner RC Motor, 395g, 1250W, 378 RPM/Volt Feature

  • Motor Type: Brushless, Outrunner
  • RPM / V (kv): 378, Watts: 1250W, Weight: 395g (13.9oz)
  • Operating Current: 40A, Peak Amps (15sec): 55A
  • Recommended LiPo: Thunder Power Pro Lite, 4 or 5 cell, 6000mAh
  • Recommended Propeller: APC 14x7 or 16x12E

Hacker A50-16S Brushless Outrunner RC Motor, 395g, 1250W, 378 RPM/Volt Overview

The Hacker A50-16S is perfect for use in your 5-7 lb sport, scale, or 3D Aerobatic RC model airplane. The A50-16S works best with 4 or 5 cell 6000mAh LiPoly battery. The Hacker A5016S is a powerful and efficient 14 pole Outrunner Brushless motor that creates massive torque and allows you to direct drive larger props without using a gearbox.These Hacker brushless motors produce the more power at lower current consumption than other popular outrunner designs! The Hacker A50-16S brushless electric motor features: * Oversize bearings * Curved Neo-magnets * High-efficiency stator design Technical Specifications for Hacker A50-16S * Motor Type: Brushless, Outrunner * RPM / V (kv): 378 * Watts: 1250W * Weight: 395g (13.9oz) * Operating Current: 40A * Peak Amps (15sec): 55A * Recommended LiPo: Thunder Power Pro Lite, 4 or 5 cell, 6000mAh * Recommended Propeller: APC 14x7 or 16x12E * Includes mounting hardware show in picture

incase skate messenger bag