What is RC Helicopters CCPM and Does it Actually Work?
It 'true that almost all the publicity has remote controlled helicopter that you see today on their chopper with 120 or 140 "CCPM". It could be a stunt? A trick, perhaps the ultimate marketing slogan. I am proud to say that the answer is no. It's actually a great bonus. Totally simplifies life flight for you, your servant makes us happy, and makes your rc helicopter to fly even better. I will help you understand better what CCPM is and what it does ... TheBenefits turn out to be obvious. It is a nickname is short for ... Collective cyclic pitch mixing. This feature is only found in helicopters radio controlled helicopter and do not apply to fixed propeller. I should note that from time to time to see CCPM talked about how electronic or mechanical mixing. While this is essentially true, I feel that too adds to the confusion. Considering that it is authentic only in the electronic CCPM, this is how it will be described inthis article.
CCPM has come to the scene, simple as that mechanically mixing tactics. One way to manage the function of pitch and loops through a complex series of links and levers. Generally, the systems were made by mixing the (CP), the action step with the slave servo cyclic left and right and front and rear power measurements in the cyclic swashplate. The main disadvantage in some forms of mechanical mixing is derived from any obligations andlevers; there is forever a bit of slop or have fun in them. This can be minimized on excessive modeled helis by using the simple ball bearings on all of these levers instead of straightforward bushings, but it goes without saying that adds to cost and mass. This tactic of pitch control also puts a lot of strain on the pitch servo. It not only has to move the entire swash pate up and down to change the pitch angle of the main rotor blades, it has to overcome all the friction associated with all the linkages. Mechanical mixing does encompass a few advantages, such as no complex "swashplate" setup to elude change issues and for the reason that the servos are regularly mounted in a servo tray and not in the frame of the helicopter, they are open to less vibration. These are negligible benefits considering that these days servos are much stronger and presently there are ways to almost cut out swash plate turnover with a good computerized and programable radio and knowledge of the proper setup agendum.
Cyclic-collective-pitch-mixing (C-C-P-M) is simply achievable because of advances in computerized radio controlled knowledge. The mixing features are all completed electronically inside the radio and the servos all work together and move accordingly. Nowadays two, three, or on occasion four servos can be hooked precisely to the swash plate with out any complicated mixing linkages. This of course makes the helicopter simple, reduces the amount of parts, substance, and money. There is a smaller amount slop in the structure and this provides very clear-cut control of your helicopter. The drawback of unwarranted strain on the pitch servo is also no more. Not only because the linkages are gone, but in addition because the work load is currently spread over two or possibly more servos.
No comments:
Post a Comment